Instigating Alerts

Join the InvestorsHub Community

Register for free to join our community of investors and share your ideas. You will also get access to streaming quotes, interactive charts, trades, portfolio, live options flow and more tools.

Live Updating

Older

$tock Rev

06/15/09 4:45 PM

Post #482

Re: #481: @$tock Rev - symw SymPowerco and Hybrid Energy

symw PPSI will be responsible for the marketing of the fuel cell, fuel cell hybrid power systems and related technologies

$tock Rev

06/15/09 4:38 PM

Post #481

Re: #480: @$tock Rev - symw The discussions relate

symw SymPowerco and Hybrid Energy Technologies Inc. are partners in the development of hybrid power systems through their jointly owned subsidiary, Polygenic Power Systems Inc. (SymPowerco 70%, HET 30%)

$tock Rev

06/15/09 4:36 PM

Post #480

Re: #479: @$tock Rev - symw........Eliminates the large charging stations where the vehicles

symw The discussions relate to HET's flat plate battery technologies and SymPowerco's Flowing Electrolyte Direct Methanol Fuel Cell (FEDMFC) and how certain design and manufacturing facilities and processes might be combined in shared facilities

$tock Rev

06/15/09 4:20 PM

Post #479

Re: #478: @$tock Rev - symw imagine the possibilities with charging while running

symw........Eliminates the large charging stations where the vehicles are “plugged in”

$tock Rev

06/15/09 4:19 PM

Post #478

Re: #477: @$tock Rev - symw Recharges its own batteries

symw imagine the possibilities with charging while running for light aircraft as well

$tock Rev

06/15/09 4:17 PM

Post #477

Re: #476: @$tock Rev - symw Requires far less energy

symw Recharges its own batteries while it’s running, never needs to be “plugged in”.

$tock Rev

06/15/09 4:16 PM

Post #476

Re: #475: @$tock Rev - symw......Reduces vehicle structural weight because of less battery weight

symw Requires far less energy to run due to the reduced weight.

$tock Rev

06/15/09 4:14 PM

Post #475

Re: #474: @$tock Rev - symw Eliminates over 60% of the

symw......Reduces vehicle structural weight because of less battery weight

$tock Rev

06/15/09 4:13 PM

Post #474

Re: #470: @$tock Rev - SYMW.....Stated SymPowerco President and CEO, John Davenport, "We

symw Eliminates over 60% of the battery weight and cost.

$tock Rev

06/14/09 10:32 PM

Post #473

Re: #472: @$tock Rev - SYMW.....GARDNERVILLE, NV--(MARKET WIRE)--May 27, 2009 -- SymPowerco Corporation

NXPN is considered a Small Cap stock with a market capitalization of $23.9M

$tock Rev

06/14/09 10:31 PM

Post #472

Re: #471: @$tock Rev - SymPowerco's extensive grant application included detailed development plans

SYMW.....GARDNERVILLE, NV--(MARKET WIRE)--May 27, 2009 -- SymPowerco Corporation (Other OTC:SYMW.PK - News) CEO John Davenport announced today that the company's majority-owned subsidiary, Polygenic Power Systems ("PPS"), has been notified that its application for grant funding from a major North American Government Agency has been approved. The funding, when received by PPS and its partners, will support SymPowerco's Flowing Electrolyte Direct Methanol Fuel Cell (FEDMFC) advanced development program

$tock Rev

06/14/09 10:30 PM

Post #471

Re: #470: @$tock Rev - SYMW.....Stated SymPowerco President and CEO, John Davenport, "We

SymPowerco's extensive grant application included detailed development plans for the FEDMFC project including engineering objectives, scalability testing as well as detailed manufacturing and marketing plans. As a result of the funding approval, SymPowerco intends to complete and implement its development plans with its project partners, Hybrid Energy Technologies, Inc. and Carleton University in Ontario, Canada. Development activities under this project are expected to start in late summer or early fall of 2009.

$tock Rev

06/14/09 10:30 PM

Post #470

SYMW.....Stated SymPowerco President and CEO, John Davenport, "We at SymPowerco are very pleased that our grant application has been approved. Like all such applications, our application was subject to rigorous academic and industrial peer reviews before final acceptance. We have successfully completed that process and we can now move forward with our plans. We believe that our Flowing Electrolyte Direct Methanol Fuel Cell will be a strong candidate for a wide variety of Hybrid Power System and Fuel Cell markets

InstigatingAlert Terminated

06/06/07 12:49 AM

Post #469

SPTN $ 27.28 must hold $ 26.85.

.

IA.

InstigatingAlert Terminated

06/05/07 2:18 AM

Post #468

UXG $ 5.76 must hold $ 5.73.

.

IA.

InstigatingAlert Terminated

06/05/07 1:08 AM

Post #467

REFR $ 11.02. Must hold $ 10.76.

.

IA.

InstigatingAlert Terminated

06/05/07 1:06 AM

Post #466

TRAD $ 12.10. Support is $ 11.99.

.

IA.

InstigatingAlert Terminated

06/05/07 12:41 AM

Post #465

BLTI $ 6.22 I'd wait for a breakout at $ 6.42.

.

IA.

IzY

04/20/07 9:45 AM

Post #464

Guys What do you think about this chart ?

I have been in it since last week and it has bounced around a bit and maby now there could be a break out with a little help from news,and it´s good news a realy handsome board they got themselves
there..

What´s your opinion guys?

IzY

december

04/18/07 11:36 AM

Post #463

Re: #462: @IzY - Great thx,i will take a look..

getting ready for the pop........

IzY

04/17/07 6:53 PM

Post #462

Re: #461: @december - In the $4-$6 million range

Great thx,i will take a look..

IzY

december

04/15/07 7:40 PM

Post #461

Re: #460: @IzY - Any idea how big they are?

In the $4-$6 million range

IzY

04/13/07 11:24 AM

Post #460

Re: #459: @december - BIG contract news coming

Any idea how big they are?

It´s a volatile stock hehe,to bad i didn´t know about this one at 0.015 :)

IzY

december

04/13/07 9:10 AM

Post #459

Re: #458: @IzY - Any trigger in the near term,as of news

BIG contract news coming

IzY

04/12/07 8:08 PM

Post #458

Re: #457: @december - DMTN Low floats and rising revenues..

Any trigger in the near term,as of news aqusitions etc?

IzY

december

04/12/07 7:54 PM

Post #457

Re: #455: @IzY - Hi December..

DMTN

Low floats and rising revenues..

IzY

04/12/07 7:35 PM

Post #456

Re: #455: @IzY - Hi December..

Chart of SFNN...

IzY

04/12/07 7:06 PM

Post #455

Re: #454: @december - D Mecatronics Projects Large Revenues and Earnings, and

Hi December..

Do you care to tell me more about that company of yours?

Thank you in advance.

One i also like is SFNN..

Good news release today,and the chart may build up for a breakout.

december

04/09/07 4:16 PM

Post #454

Re: #446: @IzY - Hi guys,a question when you post this charts

D Mecatronics Projects Large Revenues and Earnings, and is Pleased to Announce Another Contract

2007-04-09 08:00 ET - News Release

MISSISSAUGA, Ontario, April 9, 2007 (PRIME NEWSWIRE) -- D Mecatronics Inc. (Pink Sheets:DMTN) announced that its financial projections demonstrate the company will enjoy sizeable leaps in revenues and earnings over the next three years. According to its most recent forecast, D Mecatronics expects its total income in 2007 to be $10,120,000, increasing to $15,920,000 in 2008 and climbing to $21,100,000 for calendar 2009. Projected revenues will be derived from one primary source: design and manufacture of automated assembly line systems, used primarily by the automotive industry. The projections have been published in a revised business plan that includes in-depth background information on the company, its structure and management team, descriptions of its products and services, operational plans for its profit centers, as well as management's certified financial statements.

"I believe our projections to be a robust estimate of where D Mecatronics is headed from an earnings perspective," declares D Mecatronics CEO Berardino Paolucci. "In the upcoming year, we will continue offering a succession of extraordinary products and services that will undoubtedly trigger a substantial increase in our revenues. I fully expect D Mecatronics to achieve profitability this year and will provide our shareholders with remarkable financial gains over the next three years."

D Mecatronics offers a diverse range of automation services utilizing the latest proven technologies. D Mecatronics provides robust, scalable, user friendly and nonproprietary solutions that seamlessly can be integrated into existing platforms and systems. D Mecatronics focus's on all the crucial factors like production efficiency, product flexibility and traceability, maintenance and plant performance, and regulatory compliance during all the phases of a project -- from the initial design development to the installation and to future expansions. With high-quality products which reduce manufacturing costs, improve production capacity, decrease downtime, improve reliability and reduce waste, D Mecatronics is proud to announce the receipt of a purchase order valued at US$115,000, to integrate accurate and precise automation to an existing production line.

"High ethical standards and excellent customer service are the core philosophies of our business. We believe in always exceeding customer expectations and in providing extensive support from the design phase all the way through start up," states Drasko Karanovic (President of D&R Technology a wholly owned subsidiary of D Mecatronics Inc.). Mr. Karanovic continues to state, "As systems integrators, we provide solutions that are driven entirely by our customer's needs. Our ability to listen, understand and respond to our customers' requirements is key factors in our success."

The D Mecatronics Inc. logo is available at http://www.primenewswire.com/newsroom/prs/?pkgid=2180

Forward-looking statements in this release are made pursuant to the "safe harbor" provisions of the Private Securities Litigation Reform Act of 1995. Investors are cautioned that such forward-looking statements involve risks and uncertainties, including without limitation, continued acceptance of the Company's products, increased levels of competition for the Company, new products and technological changes, the Company's dependence on third-party suppliers, and other risks detailed from time to time in the Company's periodic reports filed with the Securities and Exchange Commission.

CONTACT: D Mecatronics Inc.
Dino Jr. Paolucci, Vice President & Director
(905) 625-5111
dinopaolucci@rogers.com
www.dmecatronics.com

december

04/08/07 5:55 PM

Post #453

Re: #451: @InstigatingAlert - LPTH would have been wise to be out

PMCL.PK (Up 29%) , DMTN.PK (Up 33%) ------ Looking Good For This Week

PMCL.PK - Last @ .045 - Up 29%
http://www.stockscores.com/quickreport.asp?ticker=pmcl

DMTN.PK - Last @ .04 - Up 33%
http://www.stockscores.com/quickreport.asp?ticker=dmtn

IzY

03/30/07 6:34 PM

Post #452

ILI TECHNOLOGIES RECEIVES US$ 9.5 MILLION ORDER

2007-03-30 16:44 ET - News Release

Mr. Serge Bonnet reports

ILI TECHNOLOGIES RECEIVES US$ 9.5 MILLION ORDER

ILI Technologies (2002) Corp. has received a $9.5-million (U.S.) ($11-million (Canadian)) order for its Thermoflex tubing and associated connectors, and its ESP pump products. This is by far the largest order ever received by ILI and marks the entry into a much larger revenue base for the company.

The first delivery under this contract is scheduled in the second quarter of 2007, to a large Mexican corporation. ILI will use the next few months to produce the product necessary to deliver on this initial purchase order, as well as to build up inventory of Thermoflex tubing for subsequent instalments of the contract throughout 2007 and 2008.

"This is a significant order for our organization, and changes the dynamics of our sales, rentals and distribution activities," stated Serge Bonnet, president of ILI Technologies. "We will strive to deliver on this contract as quickly as possible while continuing to pursue additional significant orders for Thermoflex tubing, and CBM pumps and wire products."

While ILI had dramatically higher corporate sales with the commencement of sales of Thermoflex tubing last summer, the company has only established regular sales channels in Mexico, and continues to pursue additional distribution in the United States and Canada. Thus the sales potential of Thermoflex tubing remains relatively untapped. ILI is also planning the expansion of manufacturing facilities for Thermoflex tubing in order to accommodate expected future orders.

Thermoflex tubing is used primarily in Mexico to replace old flow lines which are in need of replacement or repair, as well as by companies looking for longer-lasting and more efficient methods of flow lining new wells. The product has been proven to be quick and easy to install, and can withstand pressure and corrosion better than standard piping methods

And they are hosting a conference this weekend,takl about all the media attention they will get :)

Oh did i forget to mention IT´S IN US$

Great weekend guys.

IzY

InstigatingAlert Terminated

03/29/07 1:02 AM

Post #451

Re: #403: @InstigatingAlert - LPTH $ 5.95 support at $ 5.50 watch

LPTH would have been wise to be out at $ 7.00's.

IA.

InstigatingAlert Terminated

03/29/07 1:01 AM

Post #450

Re: #437: @InstigatingAlert - MECA $ 3.33

MECA $ 3.77 party finished for this.

IA.

IzY

03/27/07 12:51 PM

Post #449

One other annoying thing is my order at DTA,itried to pick up 46000shares at 12,5 cents and the same happend to that one it got no where h.a.h.a

Now DTA is trading at 15 cents,that would have been enough for me :)

Not a friend and pleased with my broker today..

IzY

IzY

03/27/07 12:47 PM

Post #448

Re: #447: @nlightn - IzY - well,...as the statement goes,..."plan your trade

Yep sama as my thinking to,well today i tried to sell some ILI.V
at 1,25 there was alot of buyers at that level.

BUT the broker i have use´s a middlehand and my order was in the market in my trading window though it did´t show up and was executed.

I called and called and he said there was a problem with their brokers in CAN,so GAH here i am am with a non executed order and the byers are at 1,08 haha.

This is the third time this broker messed up and without any consequence for them,it´s always the little guy that gets beaten.

Well as for ILI.V i would rather not sell them now as my intention was a small 5-10%trade and with the goal of owning them again today.

IzY

nlightn

03/27/07 12:34 PM

Post #447

Re: #446: @IzY - Hi guys,a question when you post this charts

IzY - well,...as the statement goes,..."plan your trade and trade your plan."

it would be to your advantage to set a stop loss right after you place your trade. to protect from any downside. then determine what you want from it?,...5%, 10%, 15%, 20% profit and set a GTC for that.

as the pps rises you might want to raise your sell order in accordance to the profit level you desire.

so the bottom line is to not get greedy and protect your investment,...but let your profits rise when the pps begins to move.

hope that assists.

IzY

03/27/07 12:28 PM

Post #446

Re: #445: @nlightn - NVEC,..poised for another run,...

Hi guys,a question when you post this charts are you in these stocks and how long do you hold them.

What i mean is what kinda profit are you expecting in each trade,and what are your stop losses?

Thanks in advance.

IzY

nlightn

03/27/07 8:17 AM

Post #445

NVEC,..poised for another run,...

nlightn

03/27/07 8:16 AM

Post #444

CVV,...GET READY for it to TAKE OFF!

InstigatingAlert Terminated

03/27/07 12:15 AM

Post #443

ZAAP $ 1.02

.

IA.

InstigatingAlert Terminated

03/27/07 12:11 AM

Post #442

ABY $ 2.80.

breakout to be confirmed at $ 2.84.

.

IA.

IzY

03/26/07 11:43 AM

Post #441

CBS.V is also on the move,it could be results are in.

If they are good we´ll probably have a breakout from 40 cents.

Keppeing my fingers crossed.

IzY

IzY

03/26/07 10:15 AM

Post #440

Re: #439: @IzY - Well i am in at 93cents+add 8000shares at

The post last friday was when the stock was at 1,03cad :)

One has to be quick..

IzY

IzY

03/26/07 10:12 AM

Post #439

Re: #436: @InstigatingAlert - ILI.V time to watch was a week ago,

Well i am in at 93cents+add 8000shares at 1,05 friday..

I will definitely keep them untill the company gets that order :)

And IA nothing is to late in this company,calculate on the value and you will find out.

IzY

december

03/25/07 5:25 PM

Post #438

Re: #437: @InstigatingAlert - MECA $ 3.33

The next CFRI...............

http://www.investorshub.com/boards/read_msg.asp?message_id=18189495

InstigatingAlert Terminated

03/25/07 3:58 PM

Post #437

MECA $ 3.33

.

IA.

InstigatingAlert Terminated

03/25/07 3:43 PM

Post #436

Re: #435: @IzY - Also watch ILI.V

ILI.V time to watch was a week ago, too late now, there are better plays out there.

IA.

IzY

03/23/07 1:20 PM

Post #435

Also watch ILI.V

And do your DD :)

Regards IzY

IzY

03/22/07 2:58 PM

Post #434

CBS.V

Well not based on the charts CBS ha had 2 good rounds of trading.

A realy good one yesterday whan i got myself a gain of 17% and a another small one today.

Molly stocks is just to hot to stay out of,but as usuall everything that goes up has to come down :)

I will try to get in at a good price again,and this time i will not drop the core position just in case we get good news.

IzY

nlightn

03/18/07 1:01 PM

Post #433

Re: #431: @InstigatingAlert - That's good dialogue guys on CBS.V. I

IA- i think you are correct that CBS.V could get a little cheaper. at least T/A it is looking that way.

haven't looked at it other than a technical play,...i'll take a view of the www. and see what is there.

TIA for posting CBS.V

Older

Instigating Alerts

Followers	3	Posters	27
Posts (Today)	0	Posts (Total)	482
Created	01/20/07	Type	Free
Moderators

The goal here is to help your fellow traders. "It is one of the most beautiful compensations of life, that no man can sincerely try to help another without helping himself." -Ralph Waldo Emerson. It would be appreciated if you could post charts with every stock you post initially. Feel free to share your DD on that particular stock. No pumping, no spamming, and no attitude towards each other. Those are the only rules for this board that must be adhered to. The members and posters of this board should have a goal to make money on the stocks posted and read and to help each other do the same. The Attitude http://www.investorshub.com/boards/read_msg.asp?message_id=16388582 The Beliefs of this board. -- I'm making the most of my life now and every day. -- I am committed to living my life with passion -- I'm using my unique gifts to enrich myself and others -- I'm making myself worth more each and every day -- I believe in the future of the human race -- I bring out the best in others There's a great man out there by the name of Zig Ziglar, if you ever have the time, please read up on him and hear of his great career as a man who has helped millions realize their potential. I'd like this board's motto to be a quote from Mr. Ziglar. "You can have everything in life you want if you'll just help enough other people to get what they want!" -- Zig Ziglar.

Board Info

Posts Today	0
Posts (Total)	482
Posters	27
Moderators

New Post

Volume
Day Range:
Bid Price
Ask Price
Last Trade Time:

Boards:

Quotes:

Boards

News

Market Data

Markets

Discover

Discover

Boards:

Quotes:

Instigating Alerts

Instigating Alerts

Join the InvestorsHub Community

Instigating Alerts

Board Info